MT-5700 Module Firmware Upgrade Method

(edited)

AI Translation中文 → English

This article has been automatically translated by AI and may contain inaccuracies

This article was last modified on . Some content may be outdated. Feel free to ask the author if you have questions.

Before reading this article, you may want to read the following articles first to better understand the context.

MT5700M-CN

When the MT-5700 module is connected to the network, execute the AT command to start remote firmware flashing for the module.

AT^FOTAOEMDL="http://fota.lazyc.at/b21/"

Enter

AT^FOTADLQ

to query the download status. The last number is the current downloaded amount, and the second-to-last number is the target size.

Enter

AT^FOTASTATE?

to query the update status. If it is 40, it means the download is complete; if it is 30, it means downloading is in progress. When it reaches 40, the download is finished.

Note: Wait for the download to complete before proceeding to the next step.

Enter

AT^FWUP

The module will automatically restart to perform the update.

Just wait. After the flashing is complete, restart it once and you will see that the upgrade to b21 firmware was successful.

Using AT commands to flash firmware online for the 5700 is convenient and fast, eliminating the hassle of disassembling and reassembling the module with an adapter board for upgrades. It also avoids looseness caused by frequent plugging and unplugging of the module's connector.